When wooden windows are difficult to open or close, often the culprit is the cords that are used to attach window weights to the lower portion of the window. These cords called sash cords can easily be repaired. Window sash cord repairs are simple enough for most homeowners to do themselves.
The window weights are attached to the window its self by means of a cord called a sash cord. The cord is fed over a pulley from the window to the weights. The weights are located behind the window frame in the wall.
Over time, the cord that holds the weights may fray and eventually break. Without the weights to counterbalance the weight of the window, it can be difficult to open or close the window. In addition, the window will not remain open on its own with the sash cords broken.
Sash cord repairs are not difficult. Most windows will have an access hole in the side of the window frame, but you have to remove the lower portion of the window to access this hole.
This portion is held in place by a small wooden trim that is easily removed. Use a sharp utility knife to cut through any paint that may be holding the trim in place. A putty knife will allow you to remove the trim gently without breaking it. You will also need to remove any metal channel and cut any remaining sash cords. You should be able to remove the lower portion of the window from the assembly. Open the access ports. The weights should be found inside these ports. Bring them out to attach the new cords which have been lowered over the pulleys.
Open the ports and take out the weights. A new cord will need to be threaded through the pulleys by using a sixteen penny nail to provide weight. Attach each cord to the existing window weights and to the lower window. Reverse the other steps to replace the window and finish the job.
Need to find out how to get your windows working properly? sash cord repairs may be what you need. Learn how to repair sash cords right now and fix your window problems forever!
categories: DIY,guides,windows,repairs,maintenance,property,self help,sash windows,joinery
Leave a comment